|
The frequency response of the transformer
is 25hz to 20Khz +0-3dB
The nominal output impedance is 600 ohms.
The input impedance is dependent on the headphones used, approximately
32 ohms.
Insertion loss less than .5dB.
Input connector - 1/8" (3.5mm) stereo
jack
Headphone connector - 1/8" (3.5mm) stereo jack
Output connector - XLR Male, transformer balanced
Attenuator 0 dB, -20 dB, -40 dB
Ground lift switch US PATENT PENDING DIMENSIONS
3-5/8" (.92mm) long
1-1/8" (42mm) high
1-15/16" (.49mm) wide
9.3 oz weight |
|
|
|
Problems
in using the AID, please fill out our support form below. Questions
on the use of the AID and any related subject will be addressed
via filling out our support form below.
If you have suggestions on the use or
improvement of the AID or other products offered by Audio
Solutions, please fill out our support form below.
If you have an audio problem and you
need assistance or you cannot find a specific item, please fill out our support form below. .
Audio Solutions,
2141 Bonnie Dr.
Payette, Idaho 83661
USA
208-642-1223
208-642-1224 fax |
